Panasonic KX-TDA600 Feature Manual page 238

1.13 P
• A flexible button cannot be customized as a Message Waiting button for another extension at a different
PBX.
• Whether or not Enhanced QSIG information is transmitted can be set in the TIE table.
• When PBXs are connected by PRI23 cards, the card must be set to ISDN Standard mode. If set to T1
mode, the card must be removed and reinstalled to allow the mode to be changed. When the card is
reinserted into the PBX, it is possible to choose whether the card will be set to T1 mode or ISDN
Standard mode. The default is ISDN Standard.
• PBX Code Method
The number used in this method must be no more than 8 digits.
• When using a mailbox number containing more than 5 digits, the version of the KX-TVA series VPS
must be 2.1 (Main Software Version 2.50) or later.
• Transfer to Mailbox
It is possible to transfer calls to a mailbox of a VPS at another PBX, by creating a flexible button
containing the following:
[T] + extension number of VPS at other PBX + [P] + [#] + 6
Then, the extension user can transfer calls to a mailbox by pressing this key, entering the mailbox
number, and going on hook.
• The VM Menu feature cannot be used in a Centralized Voice Mail network. When extensions belonging
to a PBX that is not connected to the VPS have a mailbox in the VPS, the VM Menu feature should be
disabled for the mailbox using the Class of Service (COS) setting of the VPS. Otherwise, there may be
an answering delay of about 6 seconds.
Programming References
PC Programming Manual
2.8.32 [1-3] Option—New Card Installation—ISDN Standard Mode for PRI23 Card (KX-TDA100/KX-
TDA200/KX-TDA600 only)
2.16.1 [9-1] TIE Table—Centralized VM
2.16.2 [9-2] Network Data Transmission
→ Network MSW Data Transmission for Centralized VM Feature—Data Re-transmission : Repeat
Counter
→ Network MSW Data Transmission for Centralized VM Feature—Data Re-transmission : Repeat
Timer
2.18.1 [11-1] Main—Maintenance
→ Error Log for Centralized VM—Network MSW Transmission (Counter)
→ Error Log for Centralized VM—Network MSW Transmission (Buffer)
PT Programming Manual
None
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
238 Feature Manual