Flexible Buttons - Panasonic KX-TDA600 Feature Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA600:
Table of Contents

Advertisement

Feature Manual References

1.6.3 Flexible Buttons

1.6.3
Flexible Buttons
Description
You can customize the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key
Modules, and PSs through either system or personal programming. They can then be used to make or
receive intercom or CO line calls or be used as feature buttons, as follows:
[Button Usage]
Button
Single-CO (S-CO)
Group-CO (G-CO)
Loop-CO (L-CO)
Direct Station Selection (DSS) Used to call an extension with a one-touch operation.
Network Direct Station
Selection (NDSS)
One-touch Dialing
Incoming Call Distribution
(ICD) Group
Message
FWD/DND (External/Internal/
Both)*
Group FWD (External/Internal/
Both)
Account Code Entry (Account) Used to enter an account code. (→ 1.1.2 Account Code Entry)
Conference
Terminate
Used to access a specified CO line for making or receiving calls.
(→ 1.3.14 CO Line Access)
Used to access an idle CO line in a specified trunk group for making
calls. Incoming calls from CO lines in the assigned trunk group arrive at
this button. (→ 1.3.14 CO Line Access)
Used to access an idle CO line for making calls. Incoming calls from any
CO line arrive at this button. (→ 1.3.14 CO Line Access)
(→ 1.9.13 Intercom Call)
Used to access an extension at another PBX within the same network.
(→ 1.13.15 Private Network Features—NDSS (Network Direct Station
Selection))
Used to call a preprogrammed party or access a feature with a one-
touch operation. (→ 1.12.4 One-touch Dialing)
Used to access a specified incoming call distribution (ICD) group for
making or receiving calls. (→ 1.9.1 ICD GROUP FEATURES)
Used to leave a Message Waiting indication or call back the party who
left the Message Waiting indication. (→ 1.11.3 Message Waiting)
Used to set the FWD or DND feature for the extension. The feature is
applied to CO line calls, intercom calls, or both.
(→ 1.6.7 FWD/DND Button, Group FWD Button)
Used to set the FWD feature for a specified ICD group. The feature is
applied to CO line calls, intercom calls, or both.
(→ 1.6.7 FWD/DND Button, Group FWD Button)
Used to establish a multiparty conversation. (→ 1.3.16 Conference)
Used to disconnect the current call and make another call without
hanging up. (→ 1.6.2 Flash/Recall/Terminate)
Usage
Feature Manual
1.6 F
103

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda200Kx-tda50Kx-tda100

Table of Contents