Call Pickup - Panasonic KX-TDA600 Feature Manual

1.3 C
1.3.6

Call Pickup

Description
An extension user can answer a call ringing at any other extension.
The following types of Call Pickup are available:
Type
Directed
Group
Call Pickup Deny
An extension user can prevent other extensions from picking up calls ringing at his or her own extension.
Conditions
• Call Pickup applies to:
Intercom, CO line, and doorphone calls
• Internal Call Block
An extension which cannot call certain extensions based on Class of Service (COS) programming (→
1.9.14 Internal Call Block) also cannot pick up calls ringing at those extensions.
[Directed Call Pickup]
• A user can also pick up a call to a specified extension by pressing the corresponding DSS button. This
feature is only available when (1) the user's extension is allowed to use this feature through COS
programming (for KX-TDA100, KX-TDA200, and KX-TDA600 only), (2) DSS buttons for extensions or
incoming call distribution (ICD) groups have this feature enabled through system programming, and (3)
the light pattern of DSS buttons for incoming calls to extensions or ICD groups is set to "On or Flash"
through system programming.
The light pattern of a DSS button for an incoming call to an extension or Incoming Call Distribution (ICD)
group can be programmed through system programming. Call Pickup is available only when the DSS
button is red flashing.
[Group Call Pickup]
• A specified number of call pickup groups can be created, each of which consists of extension user
groups. One extension user group can belong to several call pickup groups. (→ 1.7.1 GROUP
FEATURES)
[Example]
Call Pickup Group 1
Extension User
Group 1
Extn. 100 Extn. 101
42 Feature Manual
A specified extension's call is answered.
A call within a specified call pickup group is answered.
Call Pickup Group 2
Extension User Extension User
Group 2 Group 3
Extn. 102 Extn. 103 Extn. 104 Extn. 105
Description
Call Pickup Group 3
Extension User
Group 4
Extn. 106 Extn. 107