Panasonic KX-TDA600 Feature Manual page 327

[Transferring to a Mailbox of the VPS]
• When transferring a CO line call to a mailbox of the VPS, users should use the VM Transfer button.
If using a standard Transfer button, users must dial "#6" after accessing the VPS, and confirm that the
desired mailbox has been reached, before going on hook to complete the transfer.
Programming References
PC Programming Manual
2.9.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Recall—Transfer Recall
2.10.18 [3-7-1] VM(DPT) Group—System Settings
2.10.19 [3-7-2] VM(DPT) Group—Unit Settings
2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 4
→ LCS Recording Mode
→ LCS Answer Mode
2.11.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Ext. No. / Floating Ext. No. (for Two-way Record)
→ Ext. No. / Floating Ext. No. (for Two-way Transfer)
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
→ Ext No. of Mailbox (for Two-way Transfer)
2.11.10 [4-2-1] Portable Station—Extension Settings—Option 4—LCS Recording Mode
2.11.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Ext. No. / Floating Ext. No. (for Two-way Record)
→ Ext. No. / Floating Ext. No. (for Two-way Transfer)
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
→ Ext No. of Mailbox (for Two-way Transfer)
2.11.17 [4-3] DSS Console
→ Type
→ Ext. No. / Floating Ext. No. (for Two-way Record)
→ Ext. No. / Floating Ext. No. (for Two-way Transfer)
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
→ Ext No. of Mailbox (for Two-way Transfer)
2.12.1 [5-1] Doorphone—VM Trunk Group Number
2.17.2 [10-2] DIL Table & Port Settings—DIL
→ Tenant Number
→ VM Trunk Group No.
2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
→ Tenant Number
→ VM Trunk Group No.
PT Programming Manual
[201] Transfer Recall Time
Feature Manual References
1.6.3 Flexible Buttons
1.19 V
Feature Manual 327