Panasonic KX-TDA600 Feature Manual page 115

[Available Destinations]
Destination
Wired Extension (PT/SLT/T1-OPX)
PS
ICD Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analog/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. +
Phone no.
Extension of Another PBX (via TIE Line, Access
with PBX Code)
Extension of Another PBX (via TIE Line, Access
without PBX Code)
*: If an extension user is not permitted by COS to call a certain extension (→ 1.9.14 Internal Call Block),
the FWD feature will not function if that extension is set as the forwarding destination.
Conditions
[General]
• FWD for CO Line Calls/Intercom Calls
The extension user can set the FWD feature for CO line calls, for intercom calls, or for both.
• FWD from Incoming Call Distribution Group (Group FWD)
COS programming determines the incoming call distribution groups that can use this feature.
• FWD to CO Line
COS programming determines the extensions or incoming call distribution groups that can forward calls
externally.
The original extension's Toll Restriction and ARS still apply to the forwarded call.
• CO Line Call Duration
The duration of a CO line call can be restricted by a system timer. CO line call duration is assigned
separately for calls between an extension user and an outside party, and calls between two outside
parties.
If the timer expires, the line will be disconnected. (→ 1.3.15 CO Line Call Limitation)
Condition for Original Extension/
Availability
Incoming Call Distribution Group
Only available when FWD to
extension is allowed through COS
programming.*
–
–
–
–
Only available for incoming CO line
calls. Incoming intercom and
doorphone calls cannot be forwarded
to a DISA floating extension number.
–
Only available when FWD to CO line
is allowed through COS
programming.
Only available when FWD to CO line
is allowed through COS
programming.
–
1.6 F
Feature Manual 115