Panasonic KX-TDA600 Feature Manual page 321

Conditions
[General]
• It is possible to call an extension (extension port) in a VM group directly. If the calls are routed directly
to the extension in the group, it is possible to enable some features (e.g., FWD, Idle Extension Hunting)
on the extension in the group.
The Voice Mail DTMF/DPT (Digital) Integration (e.g., command transmit) is also available on the
extension.
• One-touch Voice Mail Feature Access
It is possible to assign a One-touch Dialing button for direct access to a Voice Mail feature. (→ 1.12.4
One-touch Dialing) For example, to access a mailbox (mailbox number 123) of the VPS (extension
number 165) directly, assign "165#6123" to a One-touch Dialing button. When pressing this button, the
outgoing message (OGM) of the mailbox will be heard.
[KX-TDA50]
• All ports in a VM (DPT) group must be connected to either the same DLC card, or to the pre-installed
Super Hybrid ports.
[KX-TDA100/KX-TDA200/KX-TDA600]
• All ports in a VM (DPT) group must be connected to a single DHLC or DLC card.
Programming References
PC Programming Manual
2.8.5 [1-1] Slot—Port Property - Extension Port
→ DPT Type—Type
→ DPT Type—VM Unit No.
→ DPT Type—VM Port No.
2.10.18 [3-7-1] VM(DPT) Group—System Settings
2.10.19 [3-7-2] VM(DPT) Group—Unit Settings
2.10.21 [3-8-1] VM(DTMF) Group—System Settings
2.10.22 [3-8-2] VM(DTMF) Group—Group Settings
PT Programming Manual
[601] Terminal Device Assignment
[660] VM Group Floating Extension Number
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
1.19.5 Voice Mail DTMF Integration
2.1 Capacity of System Resources
1.19 V
Feature Manual 321