•
If a call is transferred to an SLT, the transferring extension's information will be shown on the SLT. If the
transferring extension goes on-hook before the call is answered, the original caller's information will be
shown.
•
When Caller ID information such as "Private", "Out of Area", or "Long Distance" is received, this
information will be shown instead of the caller's number and name.
•
Even if the caller's name is sent, the name may not be shown depending on the type of SLT.
•
Incoming Call Log information is not shown on the SLT.
•
Caller ID shows whether the call is an intercom or CO line call by default. This setting can be disabled
through system programming.
Programming References
PC Programming Manual
2.9.4 [2-3] Timers & Counters—Miscellaneous
→ Caller ID—Waiting to receive
→ Caller ID—Visual Caller ID Display
2.9.17 [2-9] System Options—Option 4—Private Network—Public Call through Private Network—Minimum
Public Caller ID Digits
2.9.18 [2-10] Extension CID Settings
2.10.1 [3-1-1] Trunk Group—TRG Settings—Main—Caller-ID Modification Table
2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 8
→ Extension Caller ID
→ Incoming Call Wait Timer for Extension Caller ID
2.13.1 [6-1] System Speed Dial
2.10.3 [3-1-3] Caller ID Modification
PT Programming Manual
[001] System Speed Dialing Number
[002] System Speed Dialing Name
[490] Caller ID Signal Type
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
1.16.3 Speed Dialing, Personal
1.16.4 Speed Dialing, System
1.3.2
Call Hold
Description
An extension user can put a call on hold. The following Hold features are available:
Feature
Regular Hold
Exclusive Call Hold
Any extension can retrieve a held call.
Only the extension user who held the call can retrieve it.
Description
Feature Manual
1.3 C
33