[D-3] Maintenance Of The Front Wheel Sensor And Sensor Rotor - Yamaha FZ1-N 2007 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
c. Remove the wheel bearings "3" with a gen-
eral bearing puller.
d. Install the new wheel bearings and oil seals
in the reverse order of disassembly.
ECA14130
CAUTION:
Do not contact the wheel bearing inner race
"1" or balls "2". Contact should be made
only with the outer race "3".
NOTE:
Use a socket "4" that matches the diameter of
the wheel bearing outer race and oil seal.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS22010
[D-3] MAINTENANCE OF THE FRONT
WHEEL SENSOR AND SENSOR ROTOR
• ABS wheel speed sensor and sensor rotor
ECA14450
CAUTION:
• Handle the ABS components with care
since they have been accurately adjusted.
email: info@motomatrix.co.uk
Keep them away from dirt and do not sub-
ject them to shocks.
• The ABS wheel sensor cannot be disas-
sembled. Do not attempt to disassemble
it. If faulty, replace with a new one.
Removing the front wheel sensor
1. Remove:
• Brake hose holder "1"
• Front wheel sensor lead holder "2"
• Brake caliper "3"
• Front wheel sensor "4"
ECA4S81011
CAUTION:
• Be sure not to contact the sensor elec-
trode to any metal part when removing
the front wheel sensor from the sensor
housing.
• Do not operate the brake lever when
removing the brake caliper.
Checking the front wheel sensor and sen-
sor rotor
1. Check:
• Front wheel sensor "1"
Cracks/bends/distortion → Replace.
Iron powder/dust → Clean.
2. Check:
• Front wheel sensor rotor "2"
Cracks/damage → Replace the front wheel
assembly.
4-12
FRONT WHEEL