Yamaha FZ1-N 2007 Service Manual page 173

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
3. Remove:
• Rear wheel sensor protector
• Rear wheel sensor "4"
4. Remove:
• Rear wheel
Refer to "REMOVING THE REAR WHEEL"
on page 4-20.
5. Remove:
• Sensor rotor "5"
Checking the rear wheel sensor and sensor
rotor
1. Check:
• Rear wheel sensor
Cracks/bends/distortion → Replace.
Iron powder/dust → Clean.
2. Check:
• Rear wheel sensor rotor
Cracks/damage → Replace.
Installing the rear wheel sensor
1. Install:
• Sensor rotor "1"
Sensor rotor bolt
6 Nm (0.6 m·kg, 4.3 ft·lb)
email: info@motomatrix.co.uk
2. Install:
• Rear wheel
Refer to "INSTALLING THE REAR
WHEEL" on page 4-23.
ECA14470
CAUTION:
Make sure there are no foreign materials in
the wheel hub. Foreign materials cause
damage to the inner sensor rotor and wheel
sensor.
3. Install:
• Rear wheel sensor "2"
• Rear wheel sensor protector
• Rear wheel sensor lead stay
Rear wheel sensor bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
Rear wheel sensor protector
bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
Rear wheel sensor lead stay
bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
NOTE:
When installing the rear wheel sensor, check
the rear wheel sensor lead for twists and the
sensor electrode for foreign materials.
ECA14500
CAUTION:
To route the rear wheel sensor lead, refer to
"CABLE ROUTING" on page 2-39.
4-22
REAR WHEEL