Checking The Valves And Valve Guides - Yamaha FZ1-N 2007 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
EAS24290
CHECKING THE VALVES AND VALVE
GUIDES
The following procedure applies to all of the
valves and valve guides.
1. Measure:
• Valve-stem-to-valve-guide clearance
Out of specification → Replace the valve
guide.
• Valve-stem-to-valve-guide clearance =
Valve guide inside diameter "a" -
Valve stem diameter "b"
Valve-stem-to-valve-guide clear-
ance
Intake
0.010–0.037 mm (0.0004–
0.0015)
Limit
0.08 mm (0.0032 in)
Exhaust
0.025–0.052 mm (0.0010–
0.0020 in)
Limit
0.10 mm (0.0039 in)
2. Replace:
• Valve guide
email: info@motomatrix.co.uk
VALVES AND VALVE SPRINGS
NOTE:
To ease valve guide removal and installation,
and to maintain the correct fit, heat the cylinder
head to 100°C (212°F) in an oven.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the valve guide with the valve
guide remover "1".
b. Install the new valve guide with the valve
guide installer "2" and valve guide remover
"1".
c. After installing the valve guide, bore the
valve guide with the valve guide reamer "3"
to obtain the proper valve-stem-to-valve-
guide clearance.
NOTE:
After replacing the valve guide, reface the
valve seat.
5-24