Yamaha FZ1-N 2007 Service Manual page 216

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
4. Install:
• Dust seal "1"
• Oil seal clip "2"
• Oil seal "3"
• Washer "4"
ECA14220
CAUTION:
Make sure the numbered side of the oil seal
faces up.
NOTE:
• Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag to protect
the oil seal during installation.
5. Install:
• Oil seal "1"
(with the fork seal driver "2")
Fork seal driver
90890-01442
Adjustable fork seal driver (36–
46 mm)
YM-01442
6. Install:
• Oil seal clip "1"
email: info@motomatrix.co.uk
NOTE:
Adjust the oil seal clip so that it fits into the
outer tube's groove.
7. Install:
• Dust seal "1"
(with the fork seal driver weight "2")
Fork seal driver
90890-01442
Adjustable fork seal driver (36–
46 mm)
YM-01442
8. Install:
• Rod puller "1"
• Rod puller attachment (M 10) "2"
(onto the damper rod "3")
Rod puller
90890-01437
Rod puller attachment (M10)
90890-01436
4-65
FRONT FORK