Changing The Engine Oil - Yamaha FZ1-N 2007 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
Type
SAE10W30 or SAE10W40 or
SAE15W40 or SAE20W40 or
SAE20W50
Recommended engine oil grade
API service SG type or higher,
JASO standard MA
ECA13360
CAUTION:
• Engine oil also lubricates the clutch and
the wrong oil types or additives could
cause clutch slippage. Therefore, do not
add any chemical additives or use engine
oils with a grade of CD "c" or higher and
do not use oils labeled "ENERGY CON-
SERVING II" "d" or higher.
• Do not allow foreign materials to enter the
crankcase.
NOTE:
Before checking the engine oil level, wait a few
minutes until the oil has settled.
email: info@motomatrix.co.uk
4. Start the engine, warm it up for several
minutes, and then turn it off.
5. Check the engine oil level again.
NOTE:
Before checking the engine oil level, wait a few
minutes until the oil has settled.
EAS20790

CHANGING THE ENGINE OIL

1. Start the engine, warm it up for several
minutes, and then turn it off.
2. Place a container under the engine oil drain
bolt.
3. Remove:
• Engine oil filler cap "1"
• Engine oil drain bolt "2"
(along with the gasket)
4. Drain:
• Engine oil
(completely from the crankcase)
3-12
ENGINE