Yamaha FZ1-N 2007 Service Manual page 465

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
3. Check the wire harness.
1. Disconnection of the ABS ECU coupler terminal
2. Remove the ABS ECU coupler and wheel sensor coupler and check the conductivity, short-cir-
cuit to GND and short-circuit to SSR-VCC from the wire harness.
• Conductivity of the wire harness
Check the conductivity between "A"–"B", and "C"–"D".
• GND short-circuit
Check the short-circuit to GND between "A"–"B", and "C"–"D".
• Short-circuit between the wire harnesses
Check the short-circuit between "A"–"C", and "B"–"D".
1. ABS ECU
2. Front wheel sensor
3. Rear wheel sensor
4. Blue
5. Blue/White
4. When the items "1" to "4" are normal, replace the wheel sensor.
5. Replace the ABS ECU if the condition does not become normal even if the wheel sensor is
replaced.
Malfunction code 18 (Missing serration of sensor rotor)
1. Missing serration of the rear sensor rotor.
• Replace the rear sensor rotor.
Malfunction code 21 (Disconnection and short-circuit of hydraulic unit solenoid.)
1. Hydraulic unit solenoid coupler
• Check if the hydraulic unit solenoid coupler terminal is disconnected. (Refer to "ABS CONNEC-
TOR LOCATION CHART" on page 8-93.)
2. Hydraulic unit solenoid
• Check the front and rear wheel solenoids for continuity → [D-5]
• Check the insulation of all solenoid terminals and the negative battery terminal. → [D-5]
3. Wire harness (ABS)
• Check the hydraulic unit solenoid circuits for continuity. (See the illustration below.)
email: info@motomatrix.co.uk
ABS (ANTI-LOCK BRAKE SYSTEM)
6. Blue/Red
7. Blue/Black
8. White
9. Gray
8-110