Removing The Front Brake Calipers; Disassembling The Front Brake Calipers - Yamaha FZ1-N 2007 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
NOTE:
The arrow mark "a" on the brake pad spring
must point in the direction of disc rotation.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
3. Install:
• Brake pad pins
• Brake pad clips
• Brake caliper
Brake caliper bolt
40 Nm (4.0 m·kg, 29 ft·lb)
4. Check:
• Brake fluid level
Below the minimum level mark "a" → Add
the recommended brake fluid to the proper
level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" on page 3-23.
5. Check:
• Brake lever operation
Soft or spongy feeling → Bleed the brake
system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" on page 3-25.
EAS22300

REMOVING THE FRONT BRAKE CALIPERS

The following procedure applies to both of the
brake calipers.
email: info@motomatrix.co.uk
NOTE:
Before removing the brake caliper, drain the
brake fluid from the entire brake system.
1. Remove:
• Union bolt "1"
• Copper washers "2"
• Brake hose "3"
NOTE:
Put the end of the brake hose into a container
and pump out the brake fluid carefully.
EAS22360
DISASSEMBLING THE FRONT BRAKE
CALIPERS
The following procedure applies to both of the
brake calipers.
1. Remove:
• Brake caliper pistons "1"
• Brake caliper piston seals "2"
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Secure the brake caliper pistons with a
piece of wood "a".
b. Blow compressed air into the brake hose
joint opening "b" to force out the left side
pistons from the brake caliper.
EWA13570
WARNING
• Never try to pry out the brake caliper pis-
tons.
• Do not loosen the bolts "3".
4-32
FRONT BRAKE