Using The Stack Bypass While Reserving Print Jobs - Canon iR 3300 Reference Manual

Using the Stack Bypass While Reserving Print Jobs

Using the Stack Bypass While Reserving Print Jobs

Using the Stack Bypass While Reserving Print Jobs Using the Stack Bypass While Reserving Print Jobs
While paper is being fed from the stack bypass for the current print job, you can specify the
paper to be loaded in the stack bypass for the next reserved job.
You can reserve up to five print jobs, including the current job. Interrupt print jobs are not
included in this count.
The following example assumes that A4 plain paper is being fed from the stack bypass for the
current job, and that you are reserving A3 plain paper to be fed from the stack bypass for the
next reserved job
IMPORTANT
• • • •
If Stack Bypass Standard Settings is set to "On," you can reserve a job only with the registered
paper types. (See 'Setting the Standard Paper for the Stack Bypass,' on p. 3-25.)
1 1 1 1
Press "Stack Bypass Setting" in the Paper Selection screen that appears Press "Stack Bypass Setting" in the Paper Selection screen that appears
Press "Stack Bypass Setting" in the Paper Selection screen that appears Press "Stack Bypass Setting" in the Paper Selection screen that appears
when specifying reserved print settings. when specifying reserved print settings.
when specifying reserved print settings. when specifying reserved print settings.
NOTE
• • • •
When Standard Stack Bypass Settings is set to "On, "and "Stack Bypass" is selected, the paper
stored in the Standard Settings is displayed. (See 'Setting the Standard Paper for the Stack Bypass,'
on p. 3-25.)
Making Prints Using the Stack Bypass
1 1 1 1
1-55 1-55 1-55 1-55