Canon iR 3300 Reference Manual page 82

When Saddle Finisher-G1 is attached, and Image Orientation Priority is set to "On," load the
envelopes as shown below.
1 1 1 1
s
4 4 4 4
Select the paper size, and press "Next." Select the paper size, and press "Next."
Select the paper size, and press "Next." Select the paper size, and press "Next."
If envelopes are loaded, press "Envelopes," and specify the envelope type. Then press "OK" → "OK,"
and proceed to step 6.
When loading paper other than a standard size, press "Free Size."
To select the inch paper size, press "Inch-size".
1-52 1-52 1-52 1-52 Making Prints Using the Stack Bypass
Feeding Feeding Feeding Feeding
Direction Direction Direction Direction