Cleaning the Feeder A A A A
Cleaning the Feeder
Cleaning the Feeder
Cleaning the Feeder
If your originals have black streaks or appear dirty after copying them using the feeder, this may
be caused by pencil writing rubbing off the originals and onto the roller. Perform the feeder
cleaning procedure to clean the feeder scanning area, white plate, and roller.
IMPORTANT
• • • •
If the feeder scanning area is dirty, it may result in a paper jam or dirty print output.
• • • •
Clean the roller while spinning it.
1 1 1 1
Open the feeder cover.
Open the feeder cover.
Open the feeder cover.
Open the feeder cover.
2 2 2 2
Clean the roller (total of 3 places), as shown below, with a cloth dampened
Clean the roller (total of 3 places), as shown below, with a cloth dampened
Clean the roller (total of 3 places), as shown below, with a cloth dampened
Clean the roller (total of 3 places), as shown below, with a cloth dampened
with water.
with water.
with water.
with water.
Routine Cleaning
5-17
5-17
5-17
5-17
5 5 5 5