Canon iR 3300 Reference Manual page 73

The surface that you want to scan into memory must be placed face down. Align the corner of the
original with the top left corner (the arrow) of the platen glass.
Place books and other bound originals on the platen glass in the same way.
When enlarging A4 or A5-size originals to A3-size paper, place the original horizontally on the platen
glass, and align it with the A4R or A5R marks.
NOTE
• • • •
When copying STMT-size originals using the platen glass, you need to set "LTRR/STMT Original
Selection" in Additional Functions. (See 'Distinguishing LTRR-size and STMT-size Originals,' on
p. 3-20.)
3 3 3 3
Gently lower the feeder/platen glass cover. Gently lower the feeder/platen glass cover.
Gently lower the feeder/platen glass cover. Gently lower the feeder/platen glass cover.
CAUTION CAUTION CAUTION CAUTION
• • • •
Close the feeder/platen glass cover gently, to avoid catching your hand, as this may result in Close the feeder/platen glass cover gently, to avoid catching your hand, as this may result in
Close the feeder/platen glass cover gently, to avoid catching your hand, as this may result in Close the feeder/platen glass cover gently, to avoid catching your hand, as this may result in
personal injury. personal injury. personal injury. personal injury.
• • • •
Do not press down the feeder/platen glass cover with force when scanning thick books. This Do not press down the feeder/platen glass cover with force when scanning thick books. This
Do not press down the feeder/platen glass cover with force when scanning thick books. This Do not press down the feeder/platen glass cover with force when scanning thick books. This
may damage the platen glass and cause personal injury. may damage the platen glass and cause personal injury. may damage the platen glass and cause personal injury. may damage the platen glass and cause personal injury.
IMPORTANT
• • • •
When placing originals on the platen glass, the size of the original is detected after the feeder/platen
glass cover has been lowered. Be sure to lower the feeder/platen glass cover before copying.
Placing Originals 1-43 1-43 1-43 1-43
1 1 1 1