Canon iR 3300 Reference Manual page 193

3 3 3 3
Squeeze the lever on the front guide, as shown below. Without releasing the Squeeze the lever on the front guide, as shown below. Without releasing the
Squeeze the lever on the front guide, as shown below. Without releasing the Squeeze the lever on the front guide, as shown below. Without releasing the
lever, slide the front guide to align it with the mark for the desired paper size. lever, slide the front guide to align it with the mark for the desired paper size. lever, slide the front guide to align it with the mark for the desired paper size. lever, slide the front guide to align it with the mark for the desired paper size.
IMPORTANT
• • • •
Not adjusting the guides correctly may cause paper jams, dirty prints, or make the inside of the
machine dirty. To prevent these problems, check that the guides are adjusted correctly for the loaded
paper size.
4 4 4 4
Set the size switch to match the paper being loaded. Set the size switch to match the paper being loaded.
Set the size switch to match the paper being loaded. Set the size switch to match the paper being loaded.
"INCH": For Inch series paper
"A/B": For A/B series paper
If you change the setting of the size switch, replace the label on the paper size dial, accordingly.
IMPORTANT
• • • •
Not setting the size switch correctly, results in the display of an incorrect paper size on the touch
panel display. Also, it may cause paper jams, dirty prints, or make the inside of the machine dirty. To
prevent these problems, check that the size switch is set correctly.
Front Guide Front Guide
Front Guide Front Guide
A/B INCH
Loading Paper 5-7 5-7 5-7 5-7
5 5 5 5