Canon iR 3300 Reference Manual page 298

n Saddle Stitching Mode Saddle Stitching Mode
Saddle Stitching Mode Saddle Stitching Mode
This function enables you to make booklets, consisting of pages folded and stapled at the
centre.
ORIGINALS ORIGINALS
ORIGINALS ORIGINALS
1
2
5
6
7 7 7 7
IMPORTANT
• • • •
The maximum number of sheets that can be saddle stitched is 10 (40 pages).
• • • •
The paper sizes that can be saddle stitched are A3 and A4R.
• • • •
To perform Saddle Stitching A3, pull out the auxiliary tray of the booklet tray.
• • • •
When the Saddle Stitching mode is set, folds may appear differently according to the type of paper
and/or the number of sheets to be saddle stitched.
n Punch Mode Punch Mode
Punch Mode Punch Mode
This function punches holes (2 or 4 holes) in the printed sheets.
IMPORTANT
• • • •
You cannot punch holes in A4R (when puncher Unit-G1/H1 are attached), A5, A5R-size paper.
• • • •
Holes cannot be punched in transparencies, tracing paper, labels, heavyweight paper, bond paper,
or letterheads.
• • • •
This function is only available when the Finisher is equipped with the Puncher Unit-J1 and Puncher
Unit-G1.
• • • •
The number of holes vary depending on the puncher unit attached.
- Puncher Unit-J1: 2 holes
- Puncher Unit-G1: 4 holes
7-50 7-50 7-50 7-50 Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G1
3
4
7
8
COPY COPY COPY COPY
8 1
6 3
The prints are folded in the
centre to form a booklet.