Canon iR 3300 Reference Manual page 86

2 2 2 2
Select the paper size, and press "Next." Select the paper size, and press "Next."
Select the paper size, and press "Next." Select the paper size, and press "Next."
1 1 1 1
NOTE
• • • •
To select free size paper, press "Free Size."
• • • •
To select envelopes, press "Envelope."
• • • •
To select the inch paper size, press "Inch-size".
• • • •
If Stack Bypass Standard Settings is set to "On," the screen which shows the paper size/type
selected beforehand will be displayed. (See 'Setting the Standard Paper for the Stack Bypass,' on
p. 3-25.)
3 3 3 3
Select the paper type, and press "OK." Select the paper type, and press "OK."
Select the paper type, and press "OK." Select the paper type, and press "OK."
The paper currently loaded and the paper reserved to be loaded are displayed, as shown in the
following screen.
1-56 1-56 1-56 1-56 Making Prints Using the Stack Bypass
Paper size selected Paper size selected
Paper size selected Paper size selected
Paper size loaded presently Paper size loaded presently Paper size loaded presently Paper size loaded presently