Finishing Functions - Canon iR 3300 Reference Manual

Finishing Functions

Finishing Functions

Finishing Functions Finishing Functions
The Saddle Finisher-G1, Puncher Unit-J1 and Puncher Unit-G1 are equipped with the following
functions:
n Collate Mode Collate Mode
Collate Mode Collate Mode
This function automatically collates print sets into page order before they are delivered.
n Group Mode Group Mode
Group Mode Group Mode
This function outputs all prints of the same page in one set and slightly shifts the output
position of print sets to make them easier to handle.
NOTE
• • • •
When the Collate or Group mode is set, the tray moves down when each set of paper is delivered.
When the delivered paper reaches the stacking limit of the tray, the paper is automatically delivered
to another acceptable tray. When the paper reaches the stacking limit of all the acceptable trays,
printing stops temporarily. After you remove the delivered paper from the tray, the tray moves up the
corresponding distance and printing of the remaining sets restarts.
n Offset Mode Offset Mode
Offset Mode Offset Mode
This function outputs papers shifted to the front.
NOTE
7 7 7 7
• • • •
These functions shift each set of output paper about 20 mm before delivery, when the Collate
function or Group function has been set with "Shift" being pressed, and copies are made or prints
output from a computer.
n Staple Mode Staple Mode Staple Mode Staple Mode
This function automatically collates print sets into page order, staples the sets, and outputs
them.
CAUTION CAUTION
CAUTION CAUTION
• • • •
Do not put your hand in the tray's stapling area when the machine is equipped with the Do not put your hand in the tray's stapling area when the machine is equipped with the Do not put your hand in the tray's stapling area when the machine is equipped with the Do not put your hand in the tray's stapling area when the machine is equipped with the
Finisher. Doing so may result in injury. Finisher. Doing so may result in injury.
Finisher. Doing so may result in injury. Finisher. Doing so may result in injury.
IMPORTANT
• • • •
Heavyweight paper, envelopes, transparencies, labels, and tracing paper are output to Tray B. (You
cannot staple them.)
• • • •
You cannot corner-staple or double-staple A5 or A5R-size paper.
• • • •
The output tray moves down when each set of paper is delivered. When the delivered paper reaches
the stacking limit of the output tray, printing stops temporarily. Remove all the paper from the tray,
and the remaining printing and stapling will restart.
• • • •
Do not pull copies out of the output area while they are being stapled. Remove the copies after they
are output into the output tray.
7-48 7-48 7-48 7-48 Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G1