3 3 3 3
Push the new stamp car tridge in until it clicks, using tweezers.
Push the new stamp car tridge in until it clicks, using tweezers.
Push the new stamp car tridge in until it clicks, using tweezers.
Push the new stamp car tridge in until it clicks, using tweezers.
IMPORTANT
• • • •
Make sure that the stamp cartridge is not protruding from the surface.
• • • •
Set the stamp cartridge properly, or it may cause paper jams.
4 4 4 4
Gently close the inner cover, and close the feeder cover.
Gently close the inner cover, and close the feeder cover.
Gently close the inner cover, and close the feeder cover.
Gently close the inner cover, and close the feeder cover.
Feeder (DADF-H1)
7-33
7-33
7-33
7-33
7 7 7 7