Canon iR 3300 Reference Manual page 297

NOTE
• • • •
Copies are stapled in the following places:
- When an original is placed on the platen glass:
Corner staple area Corner staple area
Corner staple area Corner staple area
- When originals are placed in the feeder:
Corner staple area Corner staple area
Corner staple area Corner staple area
ABC
ABC
• • • •
If the number of sheets in one set exceeds 25 (for A3 size) or 50 (for A4 and A4R size), stapling will
not be performed. Only Collating will be performed.
• • • •
If the machine stops during stapling and <Load staples> is displayed, it means that almost all of the
staples have been used up and the staple case must be replaced. To proceed, replace the staple
case. (See 'Replacing the Staple Case in the Stapler Unit,' on p. 7-63.)
Double staple area Double staple area
Double staple area Double staple area
Upper left
Upper right
Lower right
Lower left
Upper left
Upper right
Lower right
Lower left
Double staple area Double staple area
Double staple area Double staple area
Upper right
Upper left
ABC
Lower left
Lower right
Upper right
ABC
Upper left
Lower left
Lower right
Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G1
Left side
Right side
Left side
Right side
Right side Right side
Left side
Right side
Left side
7 7 7 7
7-49 7-49 7-49 7-49