Load the envelopes in the direction shown below.
Front side
Front side
Front side
Front side
Align the leading edges of the envelopes, and make sure that they are held in place under the claw.
IMPORTANT
• • • •
If any envelopes are curled, flatten them out before placing them in the envelope cassette.
• • • •
When the Saddle Finisher-G1 is attached, print by setting the Image Orientation Priority to "Off" in
the Additional Functions screen.
• • • •
Do not allow the number of envelopes (height) loaded in the cassette to fall below the height limit
mark (
).
• • • •
The maximum height (quantity) of envelopes that can be loaded in the cassette is about 30 mm.
• • • •
Though the maximum height (quantity) of envelopes varies according to the envelope type and user
operating conditions, 30 mm is about 50 envelopes.
Envelope Feeder Attachment-B1
7 7 7 7
7-21
7-21
7-21
7-21