Canon iR 3300 Reference Manual page 84

NOTE
• • • •
For details of paper types, see 'Available Paper Stock,' on p. 1-61.
6 6 6 6
Press "Done." Press "Done." Press "Done." Press "Done."
1 1 1 1
When you press "Stack Bypass Setting," you can set the paper size again.
7 7 7 7
Place your originals, and programme the copy settings. Place your originals, and programme the copy settings.
Place your originals, and programme the copy settings. Place your originals, and programme the copy settings.
When printing documents stored in a mail box, this procedure is not necessary.
NOTE
• • • •
When there is no reserved job, continue the procedure from step 2.
8 8 8 8
Press Press Press Press
When printing documents stored in a mail box, press "Start Print."
Copying starts.
NOTE
• • • •
If heavyweight paper or envelopes are not fed normally from the stack bypass when printing, curl up
the edge of the paper by about 3 mm before loading it.
• • • •
To cancel all settings and return the machine to the standard mode, press
1-54 1-54 1-54 1-54 Making Prints Using the Stack Bypass
. . . .
Paper size selected Paper size selected
Paper size selected Paper size selected
Paper size loaded presently Paper size loaded presently
Paper size loaded presently Paper size loaded presently
.