Orientation Of Originals - Canon iR 3300 Reference Manual

Orientation of Originals

Orientation of Originals

Orientation of Originals Orientation of Originals
You can place original either vertically or horizontally. Always align the top edge of your original
with the back edge of the platen glass (top left corner) or the feeder.
Vertical placement Vertical placement
Vertical placement Vertical placement
Vertical placement Vertical placement
Vertical placement Vertical placement
NOTE
• • • •
If the top edge of the original is not aligned with the back edge of the platen glass, prints may not be
made correctly, depending on the mode you have set.
• • • •
A4 and A5-size originals can be placed either vertically or horizontally. However, the scanning speed
for horizontally placed originals is somewhat slower than for vertically placed originals. You can
place originals horizontally when printing with Preset Zoom mode, such as when processing
A4 → A3.
• • • •
Horizontally placed A4 and A5-size originals are referred to as A4R and A5R.
• • • •
A3-size originals must be placed horizontally.
[Platen glass] [Platen glass]
[Platen glass] [Platen glass]
Place the original
face down
[Feeder] [Feeder] [Feeder] [Feeder]
ABC
Place the original
face up
Place the original face
down
Horizontal placement Horizontal placement
Horizontal placement Horizontal placement
ABC
Horizontal placement Horizontal placement
Horizontal placement Horizontal placement
Place the original
face up
Placing Originals 1-41 1-41 1-41 1-41
1 1 1 1