Canon iR 3300 Reference Manual page 75

IMPORTANT
Original of 40 g/m 2 or less may become creased, if used in a high temperature or high humidity
• • • •
environment.
• • • •
Do not place the following types of originals in the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon-backed paper or other originals which might not feed smoothly
- Transparencies and other highly transparent originals
• • • •
If the feeder rollers are soiled from scanning an original written with pencil, perform the Feeder
Cleaning procedure. (See 'Cleaning the Feeder 1,' on p. 5-17, 'Cleaning the Feeder 2,' on p. 5-20.)
1 1 1 1
Adjust the slide guides to fit the size of the originals. Adjust the slide guides to fit the size of the originals. Adjust the slide guides to fit the size of the originals. Adjust the slide guides to fit the size of the originals.
2 2 2 2
Neatly place your originals face up in the original supply tray. Neatly place your originals face up in the original supply tray. Neatly place your originals face up in the original supply tray. Neatly place your originals face up in the original supply tray.
When enlarging A4 or A5-size originals to A3-size paper, place your originals horizontally.
Place the original as far as it will go, until the original set indicator is lit.
Placing Originals 1-45 1-45 1-45 1-45
1 1 1 1