Finishing Functions - Canon iR 3300 Reference Manual

Finishing Functions

Finishing Functions

Finishing Functions Finishing Functions
The Finisher-J1 is equipped with the following functions:
n Collate Mode Collate Mode
Collate Mode Collate Mode
This function automatically collates print sets into page order before they are delivered.
n Group Mode Group Mode
Group Mode Group Mode
This function outputs all prints of the same page in one set, and slightly shifts the output
position of print sets to make them easier to handle.
NOTE
• • • •
The output tray moves down when each set of paper is delivered. When the delivered paper reaches
the stacking limit of the tray, printing stops temporarily. Remove all the paper from the output tray,
and the remaining printing will restart.
n Offset Mode Offset Mode
Offset Mode Offset Mode
This function outputs paper shifted to the front.
NOTE
• • • •
These functions shift each set of output paper about 20 mm before delivery, when the Offset function
has been set.
n Staple Mode Staple Mode Staple Mode Staple Mode
This function automatically collates print sets into page order, staples the sets, and outputs
them.
CAUTION CAUTION
CAUTION CAUTION
• • • •
Do not place your hand in the part of the tray where stapling is performed while a finisher is Do not place your hand in the part of the tray where stapling is performed while a finisher is Do not place your hand in the part of the tray where stapling is performed while a finisher is Do not place your hand in the part of the tray where stapling is performed while a finisher is
attached, as this may result in personal injury. attached, as this may result in personal injury. attached, as this may result in personal injury. attached, as this may result in personal injury.
7 7 7 7
Finisher-J1 7-35 7-35 7-35 7-35