2 2 2 2
Select "On" or "Off,"and press "OK."
Select "On" or "Off,"and press "OK."
Select "On" or "Off,"and press "OK."
Select "On" or "Off,"and press "OK."
3 3 3 3
To disable Staple/Offset, press "Off."
To enable Staple/Offset, press "On."
3 3 3 3
Press "Done."
Press "Done."
Press "Done."
Press "Done."
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
4 4 4 4
Turn the main power switch off. Allow at least 3 seconds, before turning the
Turn the main power switch off. Allow at least 3 seconds, before turning the
Turn the main power switch off. Allow at least 3 seconds, before turning the
Turn the main power switch off. Allow at least 3 seconds, before turning the
main power switch back on.
main power switch back on.
main power switch back on.
main power switch back on.
3-44
3-44
3-44
3-44
Adjusting the Machine (Adjustment/Cleaning)