Canon iR 3300 Reference Manual page 299

NOTE
• • • •
The hole punched area is shown below.
Platen glass Platen glass
Platen glass Platen glass
• • • •
The distance between the punch holes is shown in the illustration below.
80mm 80mm 80mm
When the Puncher Unit-G1 is When the Puncher Unit-G1 is
When the Puncher Unit-G1 is When the Puncher Unit-G1 is
attached. attached.
attached. attached.
Feeder Feeder
Feeder Feeder
Hole punched
area
Hole punched
area
Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G1
Hole punched
area
Hole punched
area
80mm
When the Puncher Unit-J1 is When the Puncher Unit-J1 is
When the Puncher Unit-J1 is When the Puncher Unit-J1 is
attached. attached. attached. attached.
7 7 7 7
7-51 7-51 7-51 7-51