Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G1; Parts And Their Functions - Canon iR 3300 Reference Manual

Saddle Finisher-G1/Puncher Unit-J1/ Saddle Finisher-G1/Puncher Unit-J1/ Saddle Finisher-G1/Puncher Unit-J1/ Saddle Finisher-G1/Puncher Unit-J1/
Puncher Unit-G1 Puncher Unit-G1
Puncher Unit-G1 Puncher Unit-G1
The Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G1 is equipped with the following
functions: Collate, Group, Offset, Staple, Saddle Stitch, and Hole Punch modes. (See 'Finishing
Functions,' on p. 7-48.)
When the Saddle Finisher-G1 is attached, the Inner 2way Tray-A1 is mandatory.
NOTE
• • • •
When feeding A3-size paper, pull out the auxiliary tray.

Parts and Their Functions

Parts and Their Functions

Parts and Their Functions Parts and Their Functions
A A A A Output tray
Output tray Output tray Output tray
Paper are output to this tray. You can assign the
output of specified function setting designated
trays. (See 'Setting a Dedicated Tray for Each
Function,' on p. 3-21.)
B B B B Auxiliary tray
Auxiliary tray
Auxiliary tray Auxiliary tray
C C C C Upper cover
Upper cover
Upper cover Upper cover
Open to remove jammed paper. (See 'Clearing
Paper Jams in the Saddle Finisher-G1,' on
p. 7-52.)
D D D D Punch waste tray
Punch waste tray Punch waste tray Punch waste tray
Take this out when discarding the punch waste.
(See 'Removing Punch Waste,' on p. 7-70.)
E E E E Release button
Release button Release button Release button
Press to remove the finisher from the main unit.
B
A
H
F F F F Right cover
Right cover Right cover Right cover
Open to remove jammed copy paper.
(See 'Clearing Paper Jams in the Saddle Stitcher
Unit,' on p. 7-55.)
G G G G Upper front cover
Upper front cover
Upper front cover Upper front cover
Open this cover to replace the staple case in the
staple unit, or when a staple jam occurs.
(See 'Replacing the Staple Case in the Stapler
Unit,' on p. 7-63, 'Removing Jammed Staples from
the Stapler Unit,' on p. 7-59.)
H H H H Booklet tray
Booklet tray Booklet tray Booklet tray
The paper that is folded and stapled at the centre
to form a booklet is delivered to this tray.

Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G1

C
D
E
F
G
7-47 7-47 7-47 7-47
7 7 7 7