Reversing the Display
Reversing the Display
Reversing the Display
Reversing the Display
This function enables you to reverse the use of black and white on the touch panel display. If you
are finding it hard to make out what is being shown on the display, using this function may make
things clearer.
NOTE
• • • •
The default setting is 'OFF'.
1 1 1 1
Call up the desired screen as follows:
Call up the desired screen as follows:
Call up the desired screen as follows:
Call up the desired screen as follows:
3 3 3 3
2 2 2 2
Select "ON" or "OFF", then press "OK".
Select "ON" or "OFF", then press "OK".
Select "ON" or "OFF", then press "OK".
Select "ON" or "OFF", then press "OK".
3 3 3 3
Press "Done".
Press "Done".
Press "Done".
Press "Done".
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
3-30
3-30
3-30
3-30
Setting Specifications That Are Common to Each Function (Common Settings)
(Additional Functions)