Parameter Menus
Beep On <BEL>
When this parameter is enabled, the scanner issues a beep when a <BEL> character is
detected on the serial data line. <BEL> alerts the user that an illegal entry or other important
event has occurred.
Select whether to enable or disable this parameter.
Beep On <BEL> Character
Do Not Beep On <BEL> Character
Data Transmission - 7 or 8-Bit ASCII Data Format
This parameter determines whether data transmissions occur in the 7-bit or 8-bit ASCII
format. Select this parameter according to the requirement of the receiving device. The
default value is 8-bit ASCII.Select either 7-bit or 8-bit ASCII format for RS-232C
communications.
7-Bit
8-Bit
3-105