Scan Data Transmission Format - Symbol Cyclone M2000 Series Product Reference Manual

Cyclone

Scan Data Transmission Format

You may select one of the following options for scan data formats:
Standard: <data>
Option 1: <data> <SUFFIX>
Option 2: <PREFIX> <data> <SUFFIX>
Option 3: <PREFIX> <data>
<data> = scanned bar code data
<PREFIX> and <SUFFIX> as selected by the user.
To select a data transmission format:
1. Scan the Scan Options bar code.
2. Scan the bar code corresponding to the desired converted data format.
3. Scan Enter.
4. If you make a mistake, scan Cancel on the next page.
Note: RS-232C hosts treat the extended keypad default suffix (7013) as
ASCII data.
Data As Is
3-90
TM
M2000 Series Product Reference Guide
Scan Options
<DATA> <SUFFIX>