Move Cursor To Start Of Data; Move Cursor Past A Character - Symbol Cyclone M2000 Series Product Reference Manual

Move Cursor to Start of Data

Scan this bar code to move cursor to the beginning of the data.

Move Cursor Past a Character

This parameter moves the cursor past all sequential occurrences of a selected
character. Scan the
select a character from the
character is not there, the cursor does not move (i.e., has no effect).
Move Cursor To Start
Move Cursor Past Character
Alphanumeric Keyboard
Move Cursor Past
Character
Advanced Data Formatting (ADF)
bar code on page 4-33, then
on page 4-89. If the
4-33