Symbol Cyclone M2000 Series Product Reference Manual page 28

Cyclone
• Cyclone Semi-omnidirectional Scan Pattern, an
alternative to the full omnidirectional pattern, scans
highly truncated 1D and RSS bar codes. The bar
code must be presented horizontally with no more
o
than 20 tilt.
• Raster Scan Pattern directly opens the laser to
a full sized raster pattern. Decodes 1D, PDF-417,
RSS, and Composite Codes.
• Single Scan Line Pattern (Smart Raster)
creates a single scan line which opens vertically
for PDF-417 symbols using the Smart Raster feature. This feature autodetects the
type of bar code being scanned and adjusts its pattern accordingly. This provides
optimal performance on 1D, PDF-417, EAN/UCC, RSS and Composite
Codes.
One pattern can be selected for counter-top mode and another for hand-held mode via
programming bar code in
alternatively select a pattern by pressing the Scan Pattern Mode Selector button when the
scanner is lifted off the counter.
Raster Scan Pattern
Single Scan Line
(Smart Raster) Pattern
To scan in hand-held mode, pick up the scanner and hold it within the scanning range for
the bar code. A sensor on the bottom of the scanner's stand detects when the scanner is
lifted off the counter, and automatically switches to the programmed hand-held laser
pattern.
2-2
TM
M2000 Series Product Reference Guide
Chapter 3, Parameter
Indicator
Indicator
Figure 2-1. Top of M2000 Scanner
Menus. For hand-held mode, you may
Omni/Semi-omni Scan
Pattern Indicator
Scan Pattern Mode
Selector