Macro Pdf Features - Symbol Cyclone M2000 Series Product Reference Manual

Cyclone

Macro PDF Features

This section discusses programmable Macro PDF features fully supported by the M2000.
Macro PDF is a special feature for concatenating multiple PDF symbols into one file. The
M2000 can decode symbols that are encoded with this feature, however, the 64K version
cannot buffer large sets of macro PDF symbols.
When printing, keep each Macro PDF sequence separate, as each se-
quence has unique identifiers. Do not mix bar codes from several Macro
PDF sequences, even if they encode the same data. When scanning Mac-
ro PDF sequences, scan the entire sequence without interruption. If you
scan a mixed sequence, you get two long low beeps for inconsistent file ID
or inconsistent symbology error.
Program the required generic decode and data transmission parameters using the bar
codes on the following pages. Use the same programming method for setting Macro PDF
features as used for standard features.
Note that all parameter settings are stored in non-volatile memory and so are retained after
powerdown.
3-116
TM
M2000 Series Product Reference Guide
Caution