Table of Contents
Advertisement
Cyclone
Set Lengths for Code 39
Lengths for Code 39 may be set for any length, one or two discrete lengths, or lengths
within a specific range. The length of a code refers to the number of characters (i.e., human
readable characters), including check digit(s) the code contains. If Code 39 Full ASCII is
enabled, Length Within a Range or Any Length are the preferred options. See
4 on page A-8
for ASCII equivalents.
•
One Discrete Length - Only codes containing a selected length are decoded. For
example, if you select Code 39 One Discrete Length, then scan 1, 4, only Code
39 symbols containing 14 characters are decoded.
•
Two Discrete Lengths - Only codes containing two selected lengths are
decoded. For example, if you select Code 39 Two Discrete Lengths, then
scan 0, 2, 1, 4, only Code 39 symbols containing 2 or 14 characters are
decoded.
•
Length Within Range - A code type within a specified range is decoded. For
example, to decode Code 39 symbols containing between 4 and 12 characters,
first scan Code 39 Length Within Range. Then scan 0, 4, 1 and 2 (single digit
numbers must always be preceded by a leading zero).
•
Any Length - Code 39 symbols containing any number of characters can be
decoded.
Numeric bar codes begin on
selection, scan the
Cancel
3-56
TM
M2000 Series Product Reference Guide
page
3-130. If you make an error, or wish to change your
bar code on
page
3-132.
Table A-
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Cyclone M2000 Series and is the answer not in the manual?
Questions and answers