Set Lengths For Msi Plessey - Symbol Cyclone M2000 Series Product Reference Manual

Cyclone

Set Lengths for MSI Plessey

Lengths for MSI Plessey may be set for any length, one or two discrete lengths, or lengths
within a specific range. The length of a code refers to the number of characters (i.e., human
readable characters) the code contains, and includes check digits. See
A-8 for ASCII equivalents.
• One Discrete Length - This option allows you to decode only those codes
containing a selected length. For example, if you select MSI Plessey One Discrete
Length, then scan 1, 4, the only MSI Plessey symbols decoded are those
containing 14 characters.
• Two Discrete Lengths - This option allows you to decode only those codes
containing two selected lengths. For example, if you select MSI Plessey Two
Discrete Lengths, then scan 0, 2, 1, 4, the only MSI Plessey symbols decoded are
those containing 2 or 14 characters.
• Length Within Range - This option allows you to decode a code type within a
specified range. For example, to decode MSI Plessey symbols containing between
4 and 12 characters, first scan MSI Plessey Length Within Range. Then scan 0,
4, 1 and 2 (single digit numbers must always be preceded by a leading zero).
• Any Length - Scanning this option allows you to decode MSI Plessey symbols
containing any number of characters.
Numeric bar codes begin on
selection, scan the
3-78
TM
M2000 Series Product Reference Guide
page 3-130. If you make an error, or wish to change your
Cancel bar code on page 3-132.
Table A-4 on page