Clsi Editing; Notis Editing - Symbol Cyclone M2000 Series Product Reference Manual

TM
Cyclone M2000 Series Product Reference Guide

CLSI Editing

When enabled, this parameter strips the start and stop characters and inserts a space after
the first, fifth, and tenth characters of a 14-character Codabar symbol.
Note: Symbol length does not include start and stop characters.
Enable CLSI Editing
Disable CLSI Editing

NOTIS Editing

When enabled, this parameter strips the start and stop characters from decoded Codabar
symbol.
Enable NOTIS Editing
Disable NOTIS Editing
3-76