Macro PDF
Table 2-2
provides beeper definitions for Macro PDF mode. See
page 3-116 for an explanation of Macro PDF.
Beeper Sequence
Error
Long low tone
2 long low tones
3 long low tones
4 long low tones
5 long low tones
Fast warble tone
Decode Beep Sequence
Short tone
Short low tone
Short high tone
Double short tone
Table 2-2. Macro PDF Beeper Indications
Hi-level decode error caused by incorrect symbol.
File ID error. A bar code not in the current MPDF sequence was
scanned.
Out of memory. There is not enough buffer space to store the current
MPDF symbol.
Bad symbology. You scanned a 1-D or 2-D bar code in an MPDF
sequence, a duplicate MPDF label, an incorrect sequence, or are trying
to transmit an empty or illegal MPDF field.
Flushing buffer.
Successful parameter scanned.
Standard decode and transmit beep for all symbols.
1D portion of composite code was decoded. Decode beep follows when
entire composite code is decoded.
2D portion of composite code was decoded. Decode beep follows when
entire composite code is decoded.
MPDF symbol is buffered. A single beep indicates transmission of the
buffered data.
Macro PDF Features
Indication
Scanning
on
2-9
Need help?
Do you have a question about the Cyclone M2000 Series and is the answer not in the manual?
Questions and answers