Symbol Cyclone M2000 Series Product Reference Manual page 276

Cyclone
See Table A-2 for information on RSS and Composite Codes.
Table A-2. Composite Code Data Formats (with AIM ID enabled)
1-D Component
EAN-13, UPCA,
UPCE
EAN-8
RSS-14
RSS Limited
EAN-128
RSS Expanded
Code 39 (TLC39)
Notes:
1. All Function 1 characters in the 1D and 2D are sent as
1 in EAN-128 is not transmitted.
2. In standard mode, data following the Composite Symbol Separator is prefixed with "]e1".
3. In EAN-128 emulation mode, each packet is split on an AI boundary and is never greater that 48
characters in length.
4. In EAN-128 emulation mode, data after the firth Composite Symbol Separator is discarded.
5. If the UPC/EAN component has a supplemental, ]E1 precedes a 2-digit supplemental and ]E2
precedes the 5-digit supplemental.
R
6. is ASCII character 30 and
S
dependent.
A-2
TM
M2000 Series Product Reference Guide
Standard Mode
1D: ]E0
2D: ]e0
See note 5
1D: ]E4
2D: ]e0
See note 5
1D: ]e0
2D: ]e1
See note 2
If the last AI in the EAN-
128 is a predefined, fixed
length:]e0
Otherwise, ]e0 GS
See note 2
ANSI MH10.8.3M syntax:
R
06 Format: ]L2[)> 06
S
R
05 Format: ]L2[)> 05
S
See note 6
E
is ASCII character 4. The transmitted format (5 or 6) is data
T
Data Format
EAN-128 Emulation Mode
1D: ]E0
2D: ]C1 before each EAN-128 split transmission
See notes 3 -5
1D: ]E4
2D: ]C1 before each EAN-128 split transmission
See notes 3 -5
]C1 before each EAN-128 split transmission
See notes 3 -5
]C1 before each EAN-128 split transmission
See notes 3 and 4
G G
6P 1D data S 2D data
S S
G G
906P 1D data 8004 2D data
S S
G
(ASCII character 29); the first Function
S
R E
S T
R E
S T