Advertisement
When sanding areas on the inside of the composite sandwich parts to prepare the
surface for gluing something onto it, do NOT sand through the layer of
lightweight glass cloth on the inside foam sandwich. It is only necessary to rough
up the surface, with 80/120 grit, and wipe off any dust with acetone or denatured
alcohol (or similar) before gluing to make a perfect joint. Of course, you
should always prepare both parts to be joined before gluing for the highest
quality joints. Don't use Acetone for cleaning external, painted, surfaces as you
will damage the paint.
Tip: For cleaning small (uncured) glue spots or marks off the painted surfaces you
can use old-fashioned liquid cigarette-lighter fuel, like 'Ronsonol' or equivalent.
This does not damage the paint, as Acetone and many other solvents will, and
this is what we use at the factory.
At CARF-Models we try our best to offer you a high quality kit, with outstanding
value-for-money, and as complete as possible. However, if you feel that some
additional or different hardware should be included, please feel free to let us
know. Email us: feedback@carf-models.com. We know that even good things can
be made better !
Did you read the hints and warnings above and the instructions
carefully?
Did you understand everything in this manual completely? Then, and
only
then, let's start assembling your CARF-Models Bae Hawk Mk 66 If not,
please read it
again before you continue.
Accessories
This list will help you chose the main additional items needed to finish your BAE Hawk Mk 66
1. Servos: 8 high quality Servos all the main control surfaces require a minimum of 20 kg
torque such as JR8711
2. Aluminum servo arms
3. A receiver power supply such as a Powerbox Evolution or Cockpit
4. Turbine with a thrust of 180 – 200 N
5. Scale retract Landing Gear
6. Gear door pneumatic set
7. Speed break pneumatic set
8. Tank Set
9. Trust Tube
10. Scale Cockpit
11. Speed brake kit
Item No. 130500
Item No. 130600
Item No. 130650
Item No. 130108
Item No. 130700
Item NO. 130400
Item NO. 131650
Advertisement
