Advertisement
Fin - Rudder
The fin assembly is secured to the
fuselage using the supplied aluminum
spar which you find is predrilled and
fitted with a M3 captive nut for
securing inside the rear of the
fuselage. For the securing use the
supplied M3 x 15
Using a dremel tool or similar cut an
opening for the
servo extension lead to exit the top of
the fuselage
near the fin post.
The fin fits over the aluminium fin post
at the rear
and locates with the carbon peg at the
front, finally
securing with an M3 x 15 allen bolt at
the very front.
Advertisement
