Advertisement
Front and Main Gear Doors
The undercarriage set available for the
BAE Hawk is specifically designed for
this model and fits straight on
to the mounting rails fitted in the wings
and fuselage. The legs are supplied in
plain aluminium finish for you to fit as is
or paint according to the color scheme
of your model. The main gear legs are
supplied with a set of fiberglass covers.
These are not necessary for operation
but greatly enhance the scale looks of
the model. The front gear doors are
fully fitted for you at the factory and the
main gear doors simply attach to the
pre fitted and drilled mounting points
inside the fuselage. Fitting the main
gear door rams simply requires you to
drill the gear door ram mounting posts
Ø4mm and
attach the door rams with the supplied
M4 x 20mm
allen bolts and spike nuts. Fit the stop
collar to the ram shaft and secure
loosely in place ready for final
adjustment later. Before fitting the M3
Aluminium Ballink to the gear door ram.
Screw the clevis on to the ram as far as
it will go and attach to the pre drilled
hole on the gear door hinge.
Advertisement
