Advertisement
Front and Main retract
The small gear door has been fitted for you at the
factory. However you must make up a linkage
between this door and the strut. Begin
by drilling and tapping a hole to M2 in the center of
the front face of the retract trunnion. This will be
your first mounting point. Using 2 x M2 ball links
and a M2 x20 please cut the head of for make the
linkage, the distance between centers on this
example is 27mm. You may need to trim the ends
of the ball links to achieve the correct length. We
provide 2 small phenolic parts which are have to
glued on the small door for provide the fixing point
there, just cut the part which are the second hole
located. Attach this lug to the linkage with an M2
screw and nut and screw the other end of the
linkage to the hole you made in the trunnion. The
linkage needs to be set off the trunnion by approx.
6mm to provide clearance for movement
Advertisement
