Advertisement
Ventralfins
Install the ventral fins in the rear
of the model before final fit of
the turbine and thrust tube
assembly. The three tabs on each
fin should be scuffed with a
sheet of sandpaper before
inserting
on the pre cut slots in the
bottom of the fuselage note the
larger end of the fin is towards
the front
of the fuselage. From the inside
of the fuselage apply enough
thick cyano at each of the three
mounting tabs to ensure a secure
bond to the pads. After you can
use 30 min Epoxy for make that
Gluing area more strong if
required.
Advertisement
