Advertisement
Aileron and Flap
In the small wood pack you will find ply
pieces to make up the aileron servo
mounts. Clean the pieces
with sandpaper and assemble with
cyano making sure all joints are secure.
For aileron actuation CARF
Models recommend 25kg torque . Use a
suitable aluminium servo arm.
The distance from the hole where the
clevis go through are 19mm from center.
Screw the aileron servo with arm
installed to the poly servo mount using
2.9 x 13mm sheet metal screws
supplied and cyano in position on the
aileron servo hatch which you have
rubbed with sandpaper around
the gluing area. Take care not to glue the
servo itself to the hatch. Once the cyano
has cured, remove the
servo and apply a bead of hysol or
similar around the mounting area. You
MUST also add a small piece
of fiberglass all around the mount and
soak with epoxy to ensure the parts are
securely bonded. Once
cured, re-install the servo.
Advertisement
