Advertisement
Aileron and Flap
The aileron servo linkage is made up
using the M3 x 95mm threaded rod
with 3mm ball link at one end
and M3 aluminium clevis with 3mm pin
at the servo end. Add a length of brass
tube to the
outside of the pushrod for extra
strength if desired. Attach the ball link
end to the aileron horns with the M3
x 15 allen screw and nylock nut
supplied. Once you are happy with
aileron throws and movement you can
affix the supplied plastic fairings to
cover the mechanism. The servo hatch
/ mount is fixed to the wing
with 2.9 x 10mm sheet metal screws.
Advertisement
